|
LRHR is introducing this new section for the purchase and rental of Specialty Equipment and Attachments.
Additional information and pictures of selected equipment and attachments will be displayed when it becomes available.
Please contact the Ransome sales office if there are any questions regarding this equipment.
|
|
* * * * * * * * * * * * * * * * * * * * * * * * * |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Return to Top
|
|
|
Used Specialty Equipment and Attachments
|
|
L05262023   CAT 349E year 2012 UHR demo front, 7134 hours, 93' reach - P.O.R.
|
|
|
L08142022   Komatsu PC800  2008 year unit with approx 6800 hours, equipped with a 120' UHD front and new upsized Komatsu PC1250 boom hoist cylinders for the excavator - P.O.R.
|
|
L08232021   Komatsu PC490 demo boom machine - P.O.R.
(Click on picture to enlarge)
|
|
L08232021   Komatsu PC800 120 foot ultra high - P.O.R.
(Click on pictures to enlarge)
|
|
L08232021   Komatsu PC800 - P.O.R.
(Click on pictures to enlarge)
|
|
L08242021   Concrete Processor concrete processor and caged to be lowered by a crane to demolish smokestacks, chimneys and tall structures if you can't reach with a conventional excavator - P.O.R.
(Click on picture to enlarge)
|
|
L02172021   Deere 450LC High Reach 2002 year demo unit, with 9900 hours, one owner since new, high reach is a manual modular front with 86' reach and 5700 lbs tool capacity,
full demo cab guarding package, cab interior tilts 30 degrees - P.O.R.
|
|
|
L03012021   Komatsu PC800 with new three-piece demolition front, unit can reach 120 feet
(Click on pictures to enlarge) - P.O.R.
|
|
|
L10012022   Long Front Package  new 95' LR excavator front package to suit a Komatsu PC1250 - P.O.R.
|
|
L08222022   Genesis 1400  used shear - P.O.R.
|
|
L08152022   Labounty MSD7500R  rebuilt shear - P.O.R.
|
|
L03232022   Labounty MSD7500R  - P.O.R.
|
|
|
L03232022   Labounty MSD3000R  unit to be gone through and made work ready - P.O.R.
|
|
|
L02252022   Labounty MSD3000R  used shear, new blades to be installed - P.O.R.
|
|
|
L01132022   Labounty MSD7500R  rebuilt shear - P.O.R.
|
|
L01122022   Labounty MSD3000R  rebuilt shear with new upper jaw - P.O.R.
|
|
L01122022   Labounty MSD4500  - P.O.R.
|
|
L01122022   Genesis GXP775  rebuilt unit - P.O.R.
|
|
L01112022   Labounty MSD1500R  - P.O.R.
|
|
L01112022   Labounty MSD175R  - P.O.R.
|
|
L01112022   Genesis GXP700  used shear, as-is or rebuilt unit - P.O.R.
|
|
L10112021   Labounty MSD3000R  - P.O.R.
|
|
L10112021   Labounty MSD2500R  - P.O.R.
|
|
L10112021   Labounty MSD2000R  - P.O.R.
|
|
L10112021   Labounty MSD50  missing gearbox but other than that it's a good shear - P.O.R.
|
|
L10112021   CAT S305  mini-shear - P.O.R.
|
|
L09232021   Bucket used 80" bucket to suit a Hitachi EX800 - P.O.R.
|
|
L09232021   Bucket used 66" bucket to suit a Komatsu PC750 - P.O.R.
|
|
L09232021   Hensley Bucket used 73" bucket to suit a Komatsu PC400 - P.O.R.
|
|
L09202021   CAT Grapple quick coupler grapple - P.O.R.
|
|
L09202021   Labounty MSD4500R Shear  rebuilt unit with new upper jaw - P.O.R.
|
|
|
L09092021   Bucket used 96" bucket to suit a Komatsu PC800, weighs 12,500 lbs - P.O.R.
|
|
L09092021   Bucket used 72" bucket to suit a Komatsu PC800 - P.O.R.
|
|
L08232021   Komatsu PC800 long boom machine, with MSD3000R shear - P.O.R.
(Click on picture to enlarge)
|
|
L05312021   Labounty Grapple  for Komatsu PC750 - P.O.R.
|
|
|
L05292021   Universal Processor  third member concrete pulverizer with rebar cutter - P.O.R.
|
|
L05292021   Rotating Shear  - P.O.R.
|
|
L05262021   Ripper Bucket  used ripper bucket for a large machine - P.O.R.
|
|
L05262021   LaBounty MSD3000R  available as straight or rotator unit, rebuilt shear with new upper jaw - P.O.R.
|
|
|
L05262021   LaBounty MSD50  rebuilt unit with new upper jaw - P.O.R.
|
|
|
L05262021   Grapple  used 3x2 grapple to fit a CAT 345 or Komatsu PC400 excavator - P.O.R.
|
|
L05202021   Bucket  60 inch bucket for PC400, 100 mm pins - P.O.R.
|
|
L05202021   CAT Grapple  a quick coupler grapple for a CAT 345, also could go on the PC400 if the coupler can reach 22.5 center to center, main pin 100, rear pin 80 - P.O.R.
|
|
|
L05182021   Stick Extension  20 foot stick extension, Add-A-Stick unit, with head bracket for PC750 or PC490 - P.O.R.
|
|
|
L05182021   LaBounty MSD 4000R  - P.O.R.
(Click on pictures to enlarge)
|
|
|
L05182021   LaBounty MSD 4000R  set up for your machine, set up either second member or third member - P.O.R.
(Click on pictures to enlarge)
|
|
|
L05132021   LaBounty UP45  with speed valve, with tank shear jaws - P.O.R.
|
|
|
L05132021   Material Handler Front  20 to 25 foot, for PC490 or similar size machine - P.O.R.
|
|
L05102021   LaBounty UP45  with shear jaws - P.O.R.
|
|
|
L05102021   Totem Clamshell Bucket  - P.O.R.
|
|
L05102021   LaBounty MSD 3000R  condition as is - P.O.R.
|
|
L05072021   HDR160 Grapple  90 millimeter pins, 19.75 inch opening, center to center 21 inches, no baseplate - P.O.R.
|
|
|
L05032021   Labounty MSD 4500R - P.O.R.
(Click on pictures to enlarge)
|
|
|
L05032021   Labounty MSD 4500R - P.O.R.
(Click on pictures to enlarge)
|
|
L03012021   Komatsu PC800 LC 120 foot PC 800 with new 3 piece demolition modular front
(Click on pictures to enlarge) - P.O.R.
|
|
|
L03012021   Komatsu PC750 LC 2004 year unit, with 10,000 hours, reaches 115 feet, 3-piece demolition front shown below
(Click on pictures to enlarge) - P.O.R.
|
|
|
L03022021   Komatsu PC750 LC
(Click on pictures to enlarge) - P.O.R.
 
|
|
|
L04272021   Komatsu PC390 with Labounty MSD 2500R
(Click on pictures to enlarge) - P.O.R.
 
|
|
|
L04212021   Stick Extension 20 foot extension with bucket, adaptable for 50,000 pound machines and bigger - P.O.R. (Click on picture to enlarge)
|
|
L04202021   Labounty Shear large shear available for rental or sale - P.O.R.
|
|
L04202021   Labounty Shear large shear available for rental or sale - P.O.R.
|
|
L04202021   Labounty MSD175R - P.O.R.
|
|
|
L04192021   Komatsu PC450 three piece demolition machine available for rent or sale - P.O.R.
|
|
L04192021   Komatsu PC490 available with either Long Reach front or three-piece High Reach demolition front - P.O.R.
(Click on pictures to enlarge)
|
|
L04192021   Ripper Bucket 34 inches wide, center to center 26.25 inches, pins 4.5 inches - P.O.R.
|
|
|
L04192021   Esco Bucket 23.25 inch opening, bucket 67 inches wide, center to center 27.25 inches, bad teeth front main pinhole 5.75, rear hole 5.25, 4 yd? - P.O.R.
|
|
L04192021   Hensley Bucket 70 - 72 inches wide, set up for PC400, 4.5 cu yd - P.O.R.
|
|
|
L04192021   CF Bucket 70 inches, 22 inch opening, center to center 27 inches, 5" pins? with bushings - P.O.R.
|
|
L04192021   Bucket 72 inch 600 bucket, 18.75 inch opening, set of the center 27 inches, main pin 4 5/8 inches, rear pin 4.5 inches - P.O.R.
|
|
|
L04192021   EBI Bucket 22 inch opening could expand two more inches, center to center 22.75 inches, main pin 5.75 inches, with a bushing down to 5 1/8 rear pin 5 1/8, 5800 lbs - P.O.R.
|
|
L04192021   Bucket 72 inches wide, with 21 1/8 inch stick opening, main pin 5 1/8 inches, has bushing center to center 30.5 inches - P.O.R.
|
|
|
L04182021   Bucket 78 inches wide, 20.5 inch opening tooth 9W855, center to center 24.5 inches, main hole 5 1/8 inch, rear hole 4.5 inch - P.O.R.
|
|
|
L04182021   Bucket 70 inches wide, 20.75 inch opening, main pin 5 1/8 inches, rear pin 4.75 inches, center to center 29.5 inches - P.O.R.
|
|
|
L04182021   Bucket 80 inches wide, 62 inches deep, 55 inches from the cutting edge to the top of the inside bucket, stick with 21.5 up to 22.5 inches, has bosses center to center 30 5/8 inches, main pin 5 1/8 inches, rear pin 4 1/2 inches - P.O.R.
(Click on pictures to enlarge)
|
|
|
L04122021   Hydraulic Quick Coupler Stub Boom can be used with high reach, long reach or material handler front for PC 450/490 - P.O.R.
|
|
L04122021   Komatsu PC270 Long Reach machine available for rent or sale - P.O.R.
|
|
|
L04112021   Komatsu PC850 Long Reach available with long reach front or demolition three piece front or material handler front - P.O.R.
|
|
L04112021   Demolition Front 3 piece demo front for PC450 or PC490 - P.O.R.
>
|
|
L04082021   Labounty MWS80 Stump Splitter wood shear set up for a PC300 - P.O.R.
|
|
|
L04062021   Large Grapple
(Click on last 4 pics to view measurements) - P.O.R.
|
|
L04052021   Crusher for silos and smokestacks, unit can be lowered by crane over the edge of a smokestack or silo and crush as you lower it down with the frame guiding it down the side of the structure
(Click on pictures to enlarge) - P.O.R.
|
|
L04052021   A-ward Shear  bucket linkage shear - P.O.R.
|
|
L04052021   A-ward Shear  rebar shear - P.O.R.
|
|
L04052021   LaBounty MSD 4500R  rebuilt shear - P.O.R.
|
|
L03182021   LaBounty MSD 4500R  - P.O.R.
|
|
|
L03142021   Material Handler Front available for PC 650, boom length is 32', stick length is 26' - P.O.R.
|
|
|
L03142021   CAT E70B midi excavator with CAT shear unit, available for sale or rent - P.O.R.
(Click on pictures to enlarge)
|
|
|
L03122021   PC 490 LC demolition machine, call for details - P.O.R.
|
|
L03122021   Komatsu PC750 LC available with material handler front or high reach demolition front
(Click on pictures to enlarge) - P.O.R.
 
|
|
|
L03082021   Stick Extensions  20 foot extension, 90 mm pin opening 16 inch and a half less a slight boss center to center 23 inches, military surplus (your tax dollars at work) - P.O.R.
(Click on pictures to enlarge)
|
|
|
L03082021   Excavator Crane available for rental - P.O.R.
|
|
L04212021   Storage Rack for long front and standard front - P.O.R. (Click on picture to enlarge)
|
|
L03022021   High Reach Cradle for 3-piece demolition front, racks are used for shipping and transporting the fronts, also used to store the fronts on the job site - P.O.R.
(Click on pictures to enlarge)
|
|
|
L03022021   Quick Coupler hydraulic quick coupler system - P.O.R. (Click on pictures to enlarge)
|
|
|
L03012021   Demolition Front new 3 piece demolition modular front (Click on pictures to enlarge) - P.O.R.
|
|
|
L02262021   Portable Crusher available for rent or sale - P.O.R.
|
|
L02262021   Komatsu PC290 with magnet package available for sale or rental - P.O.R.
|
|
L02252021   Komatsu PC228 with grapple, available for rental - P.O.R.
|
|
L02252021   PC270 Long Reach machine available for rental or sale - P.O.R.
|
|
L02252021   PC450 High Reach has manual quick coupler for the boom, demolition tool extra - P.O.R.
|
|
|
L02252021   Labounty PC400 Grapple - P.O.R.
|
|
L02252021   Labounty PC400 Grapple unit available including hard facing extra ware plates and tips if needed - P.O.R.
|
|
L02252021   Komatsu PC750 many machine shear combinations available, call Ransome office for additional info - P.O.R.
|
|
L02242021   PC490 Long Front quick coupler arrangement to take boom on and off and change booms quickly - P.O.R.
|
|
L02232021   Komatsu PC490-10 with hammer circuit, shear circuit, rotate circuit, 2012 to 2014 vintage, 8059 hours, with 3-piece 85 foot demolition front, available for rent - P.O.R.
|
|
|
L02222021   Komatsu PC490-10 year 2012 to 2014 machine, with 5000 to 8000 hours, comes with MSD4500R shear, pics are available upon request - P.O.R. |
|
L02222021   Labounty MSD4500R can be rebuilt, pics are available upon request- P.O.R. |
|
L01182021   Komatsu PC290LC Long Reach machine comes with HDR50 grapple and magnet - P.O.R.
|
|
|
L01252021   Komatsu PC490-10 Long Reach machine comes with a standard boom and stick and the 3000R shear - P.O.R.
|
|
|
L01252021   Komatsu PC490-10 Long Reach machine comes with a standard boom and stick and the 3000R shear - P.O.R.
NOTE: this machine is model PC490
|
|
|
L01232021   Labounty MSD3000R rebuilt shear, goes with both PC490 machines - P.O.R.
Before rebuild pictures
After rebuild pictures
|
|
|