material handler front endmaterial handler boom
LRHR, LLC 106 Ark Road - Lumberton, NJ Phone: 609-257-3706


   Welcome

   About Us

   Long Reach

   High Reach

   Stick
   Extension

   Telescopic
   Booms / Sticks

   Demolition
   Front End

   Marsh Buggies /
   Amphibious
   Excavators Info

   Marsh Buggies
   For Sale/Rentals

   Custom Modified
   Booms / Sticks
   and Repairs

   - Used -
   Booms & Sticks
   Long Fronts
   Long & High Reach

   Add a Stick

   Material Handler
   F/E & Machines

   
Standard - Cores
   Booms / Sticks

   Marine Equipment

   Elevated Cab

   About our Factory

   Clamshells &
   Special
   Attachments

   Contact Info

   Directions


 


Used:  Booms & Sticks,
Long Fronts, Long & High Reach Machines

 

Booms & Sticks   Stick Extensions  |   Long Fronts  |   L/R Machines  |   H/R Machines

 

Click here for Used Marsh Buggies


Click here for Used Material Handlers

 

 
Ransome's Long Reach High Reach Locator System handles our customers' needs when they are looking for additional reach for that special application when using construction equipment attachments. We make it easy to add a stick.

If you would like to list your used units or need a good source for Booms and Sticks or Machine Combos, give us a call.

All items listed are actual units; however, call us to check availability as some of them may have been sold or could be out on rental.

————————————————————————————
 

Booms & Sticks

 
04132017   CAT 345  boom and stick - P.O.R.
     

     
 
 
03222017   CAT 385C Boom / Stick  - P.O.R.
  
 
05232016   CAT 245  35 foot stick and bucket - P.O.R.
     

     

     

     

  
 
 
10022015   CAT 365 Long Stick  stick length is 22 feet 1 inch and width is 21.5 inches, linkage width is 18.5 inches, h link??, 19 inches into the bucket, boom end mounts on CAT 385, bucket CAT 365 linkage, stainless steel bucket is available at extra cost - P.O.R.
     

     

     

     

     
 
 
04202015   CAT 385 Stick  18-30 foot - P.O.R.
     

 
 
03222015   PC400 Long Reach  boom and stick - P.O.R.
  (Click on the pictures below to enlarge)
     

     

             
 
 
12102012   Custom Demolition / High Reach Stick  Special stick modification for high reach demolition or material handlers - P.O.R.       (Click on pictures to enlarge)
add a stick    add a stick    add a stick

add a stick    add a stick

add a stick      add a stick      add a stick

add a stick
add a stick
DEMO STICK FOR JD/HITACHI 450


POTENTIAL HIGH REACH AND LONG REACH FOR 85-TON EXCAVATOR

(Click on drawing to enlarge)


JD800 80-ton machine





(Click on chart to enlarge)


CAT 374DL machine



(Click on chart to enlarge)


PC400 machine
 
 
02052013   High Reach / Long Reach  - P.O.R.       (Click on drawing to enlarge)
POTENTIAL HIGH REACH AND LONG REACH FOR 85 TON EXCAVATOR
 
03282013   ZX650 Long Reach  - 19 meter Digging Depth       (Click on drawing to enlarge)
 
04092013   PC1000 Stick  being cut and stretched to 28 feet and converted for a PC1250 front - P.O.R.
     

 
05272012   Stick and grapple  will fit a Komatsu PC400 or 3rd member for an 80 ton machine - P.O.R.
     

  
 
 
01082014   Long Stick  for CAT 345 - P.O.R.
   
 
03302016   CAT 320C/320CL  2.9 meter/9'6" stick complete with bucket cylinder, linkage and extra hydraulic lines, clean stick with no repairs - P.O.R.
 
03302016   CAT 320  9'7" stick assembly - P.O.R.
 
03302016   CAT 320CL  stick with bucket curl cylinder - P.O.R.
 
03282016   CAT 385  18' stick - P.O.R.
     

  
 
 
02292016   CAT 324DL  long reach stick, 29.5 ft long - P.O.R.
     

  
 
 
02172016   CAT 322  long reach upper - P.O.R.
     

     

     

  
 
 
02172016   CAT 330 boom  21'4" length, takes a 110mm pin for stick, very good condition - P.O.R.
     

     

  
 
 
01272016   CAT 385 Stick  2.9 meters (9.5 ft), JB family, mass excavation - P.O.R.
  
 
01272016   CAT 385 Stick  3.4m (11.2ft) mass, average shape, some bumps, bushing to replace, plate - P.O.R.
     

  
 
 
11302015   Hyundai Booms   (Click on pictures below to enlarge) - P.O.R.
   

   
 
 
11302015   John Deere Boom  60 foot long reach boom, will fit either Hitachi or John Deere 230 or 270 series machine, comes with the bucket crowd cylinder and the boom to stick cylinder, but no bucket, boom is in good shape with no welds or patches, has all hydraulic hard lines - P.O.R.
     
 
03222015   CAT 350L  boom and stick, no cracks or welds - P.O.R.
 
10142014   PC1250 LC-8  arm, 11'2" - P.O.R.
     
 
10142014   Arm  50' boom - P.O.R.
           
 
 
06092014   Boom and Stick  CAT 325 material handler front (boom and stick only) - P.O.R.
     

     
 
 
03272014   PC400 Demolition Stick  22 foot stick to go straight up from the boom - P.O.R.
     

     

     

     

 
 
04282014   PC300 Demolition Stick  25 ft demo stick, reaches 25 ft straight up off of the boom, unit can reach over 50 ft - P.O.R.
 
03052014   Stick  new 2013 unit, fits to Deere. Hitachi 330, 330 LC, 330C, 330C LC - P.O.R.
 
03052014   Stick  new 2013 unit, fits to CAT 325, 2200 lbs - P.O.R.
 
03052014   Stick  new 2013 unit, fits to CAT 320, 1800 lbs - P.O.R.
 
01192014   CAT330  18 foot stick for 330 - P.O.R.
 
01102014   SEC Stick  brand NEW 25 foot stick, fits ZX330, JD330 and EX330 - P.O.R.
       

   
 
Return to Top
 

Stick Extensions

 
04252017   Young Stick  for PC400, length 24 feet - P.O.R.
     

  
 
 
03022017   Stick Extension  28 ft extension stick to fit the CAT 345, 100mm top pin and 80mm bottom pin, 445mm distance between the ears, 23.25" pin center to center - P.O.R.
     

  
 
11302016   Stick Extension  24ft/9" extension stick to fit a CAT330 with bucket included, 100m pins top and 90mm bottom, 385mm distance between the ears, 21" pin center to center - P.O.R.
   (Click on the pictures below to enlarge)
   
 
11302016   Stick Extension  21ft/7" extension stick to fit a ZX300 with bucket included, 100mm top and bottom, 425mm distance between the ears, 23" pin center to center - P.O.R.
   (Click on the pictures below to enlarge)
         
 
05232016   CAT 245  35 foot stick and bucket - P.O.R.
     

     

     

     

  
 
 
05022016   Stick Extension  any length needed depending on machine size, multiple stick end attachment options available - P.O.R.
   (Click on the pictures below to enlarge)
   

   
 
 
05042016   Stick Extension  16 feet of reach - P.O.R.
     

  
 
09192016   Stick Extension  10 ft extension, CAT 320, no bucket with it - P.O.R.
     
 
07272016   Stick Extension  16 feet long, for 20 ton excavator, clean and painted - P.O.R.
     

 
 
07202016   Stick Extension  new unused 21ft 10in SEC extension stick, comes with a new unused 42" SEC ditching bucket, fits to CAT330B, CAT330C and CAT330D, distance between the ears 385mm or 15.1575 inches, pin centers - 21 in, weight is 2,660 lbs - P.O.R.
 
07202016   Stick Extension  new unused 21ft 7" SEC extension stick comes with a new unused 42" SEC ditching bucket, fits to EX300, ZX330, ZX350, JD330 and JD350, distance between the ears 425 mm or 16.7323 inches, pin centers - 23 in or 533.4 inches, weight is 2,320 lbs - P.O.R.
 
07202016   Stick Extension  fits to ZX330 - P.O.R.
 
07022015   Stick Extension  20 ft. 8 in. Add-A-Stick for CAT 330 size machine, includes 42 in. bucket, bucket cylinder and linkage - P.O.R.
     

  

     
 
 
04122016   CAT 320 Stick Extension  10 ft extension stick with grapple - P.O.R.
 
04122016   CAT 325 Stick Extension  13 ft extension stick with grapple - P.O.R.
 
04122016   Stick Extension  9' 6" stick, bucket end is 10.25", present pin is 2.5" with bushing to go up to 80mm, other end to attach to stick is 14" wide 90mm and center to center is 20.25", bolt on head bracket - P.O.R.
     

     

  
 
 
03292016   Stick Extension  10 ft extension stick for CAT 320 - P.O.R.
 
03202016   Long Front  46 foot front for PC400, boom is 16’ length, stick is 30’ length - P.O.R.
     

 
02142016   Stick Extension  25ft extension stick for a CAT330, use 100mm pins and distance between ears is 385mm on the CAT model, comes with a 45" ditching bucket - P.O.R.
 
02142016   Stick Extension  21ft stick for a ZX330, use 100mm pins and distance between ears is 425mm on the ZX model, comes with a 45" ditching bucket - P.O.R.
 
11302015   Stick Extension  20' stick, with 100mm pins, 425mm between the ears and 23" center to center - P.O.R.
  
 
11222014   Versa Max Stick Extension  for an 800 size machine or bigger allows you the option to pin on a 15' stick extension with a hammer-style head bracket in a 3rd member position - P.O.R.
   If you want to mount 2nd member, just bolt on the adapter section and now you have an 18' extension - P.O.R.
   Another option is to add a 10' center section to give you 28' additional reach - P.O.R.

Note:  with the addition of a demo stick base, your stick can now perform high reach demolition operations for a fraction of the cost of other methods
     

     
 
 
06302015   Stick Extension  21 ft, has two 80mm pins and 353mm between the ears and 19" pin centers, also included is a 42" ditching bucket - P.O.R.
     

  
 
 
06212015   Gooseneck Stick Extension  fits a CAT 350 - P.O.R.
     

  
 
 
05282015   Demolition Stick Extension  for CAT 374 or whatever machine model you need - P.O.R.
   (Click on the pictures below to enlarge)
   

 
 
 
04152015   Stick Extension  new unused 10 ft extension stick, comes with a new unused 42" ditching bucket, fits to PC200, SK200, EC210 - P.O.R.
     
 
01242015   Add-a-boot Stick  appears to be 400 size - P.O.R.
     
 
10292014   Stick Extension  one end mounted on machine is set up for PC300, the other end takes a PC200 bucket - P.O.R.
   
 
08042014   Stick Extension  12 foot extension, set up for a PC300 - P.O.R.
     

     

 
 
08042014   Stick Extension  - P.O.R.
  
 
08042014   Stick Extension  - P.O.R.
  
 
06222014   Arm and Bucket for a Mitsubishi MS180L excavator, 19 foot long and 23 foot long depending on how you mount it, center of pin to center of pin - 16', bucket width on extra boom - 59", possibly a 1.25 yd bucket - P.O.R.
     

 
 
03232014   Long Reach Stick  for CAT 345 aprox. 35 feet long - P.O.R.
 
06112014   21' Stick Extension  20'8" Add-A-Stick to include 42" bucket fits to CAT 330BL/CL, Komatsu PC300/PC350, Kobelco SK330/350, Case 330/350, LinkBelt 330LX - P.O.R.
     

 
 
03272014   PC400 Demolition Stick  22 foot stick to go straight up from the boom - P.O.R.
     

     

  
 
 
04282014   PC300 Demolition Stick  25 ft demo stick, reaches 25 ft straight up off of the boom, unit can reach over 50 ft - P.O.R.
 
04282014   Kenco Add–a-Stick  20’ stick for EX450 - P.O.R.
     

 
 
02042014   36' Stick  fits CAT 235 or 345, stick with 32" 38" at side cutters, boom-to-stick pin hole 5" and 16 1/2 wide at the pin hole, hyd cyl boom-to-stick hole is 3 3/4 and 4 15 /16 between ears - P.O.R.
     

     

     
 
 
Return to Top
 

Long Fronts

 
04252017   Young Stick  for PC400, length 24 feet - P.O.R.
     

  
 
 
03062017   Long Reach  55' long reach for a CAT 320C - P.O.R.
 
03062017   Long Reach  55' long reach for a CAT 320D - P.O.R.
 
03062017   Long Reach  55' long reach for a Komatsu PC200 - P.O.R.
 
03062017   Long Reach  55' long reach for a Volvo EC210 - P.O.R.
 
03062017   Long Reach  60' long reach for a Volvo EC290 - P.O.R.
 
04132017   Long Reach  for Komatsu PC220LC-7, boom, stick and ditching bucket, approx. used for 40 to 60 hours, bought new in 2008, very clean - P.O.R.
     

     

  
 
 
02212017   Young long front  55' long front arm, boom, boom cylinders, fits Komatsu PC220 LC-8, 2,200 lb additional counterweight, 4176 hours - P.O.R.
     

  
 
 
05282014   Komatsu PC220  long reach - P.O.R.
     

     

     
 
 
02132017   Long Reach  - P.O.R.
     
 
01252017   CAT long front  provides 60 foot reach, includes 33'5" boom, 25'8" stick, includes bucket linkage, cylinders, lines and 25% heavier counterweight, has less than 1000 hrs of use on long reach - P.O.R.
     

     
 
 
01252017   Long Front  55 feet, for CAT 320 - P.O.R.
  
 
01252017   Komatsu PC1800  60 foot material handler front - P.O.R.
 
01032017   CAT long reach  65' reach, for CAT 330C - P.O.R.
  

     
 
 
12272016   CAT 345  long reach - P.O.R.
     

     
 
 
05232016   PC400  long reach package, 69 feet - P.O.R.
  
 
03222015   PC400 Long Reach  boom and stick, 69 foot long reach for Komatsu PC400 - P.O.R.   (Click on the pictures below to enlarge)
     

     

             
 
 
09182014   Komatsu PC300  new 65 foot long reach front - P.O.R.
        (Click on photos to enlarge)
 
09182014   Komatsu PC400 LC-7  69 foot long reach front - P.O.R.
   
     (Click on photos to enlarge)
 
 
02052013   High Reach / Long Reach  - P.O.R.       (Click on drawing to enlarge)
POTENTIAL HIGH REACH AND LONG REACH FOR 85 TON EXCAVATOR
 
12102012   Custom Demolition / High Reach Stick  Special stick modification for high reach demolition or material handlers - P.O.R.       (Click on pictures to enlarge)
       

   

           



DEMO STICK FOR JD/HITACHI 450
 
 
03282013   ZX650 Long Reach  - 19 meter Digging Depth       (Click on drawing to enlarge)
 
08012014   LinkBelt 3400  60' long front, boom width 29.25 inches, 100 mm main pin, 100 mm boom cylnder pins - P.O.R.
       

     
 
 
10172016   TL Long Reach  55’ long reach with ditching bucket, fits Hitachi ZX200 and John Deere 200LC - P.O.R.
     
 
10172016   TL Long Reach  55’ long reach with ditching bucket, fits Volvo EC-210B and Volvo 210LC - P.O.R.
     
 
10172016   TL Long Reach  55’ long range attachment with ditching bucket, fits CAT 320 BL, 320 CL, and 320 DL - P.O.R.
  
 
09152016   Long Reach  50' reach for EX200, includes the long boom and stick, bucket cylinder, linkage set and a used 60" ditching bucket - P.O.R.
     

     

  
 
 
09142016   Long Reach  new unused 2015 unit, 55' long reach boom and stick, fits Volvo EC210 models, comes with clean out bucket and bucket cylinder - P.O.R.
  
 
09142016   Long Front  50 foot front for Hitachi ZX200/ZX210, no stick cylinder included - P.O.R.
     

     

  
 
 
09142016   Long Front  long reach boom, stick and bucket set up CAT 325D excavator - P.O.R.
     

     

           

     

 
 
07202016   Pierce Pacific Front  62' long reach front for JD350D, boom 31 3/4 wide at base to house, 110mm pin hole, boom is 36ft long, stick is 26ft long, lift cyls 100mm - P.O.R.
     

     

     
 
 
06232016   CAT 365  stick 25' 7" reach, boom 11" 10" (VB) and bucket linkage VB-family - P.O.R.
 
06062016   Daewoo 450  62 foot long reach front - P.O.R.
 
05102016   Pierce Pacific LR3760  62ft long reach boom, 31 3/4 wide at base to house, 110mm pin hole, boom is 36ft long, stick is 26ft long - P.O.R.
 
05042016   CAT 345 Long Reach  - P.O.R.
     

     
 
 
04202016   PC200 long reach  55' long reach front package for Komatsu PC200 - P.O.R.
     



     
 
 
04132016   CAT 365 boom  measurement - boom foot 43.25" wide - P.O.R.
  
 
04122016   Pierce Pacific long reach  60' long reach front package for Komatsu PC220/250?? - P.O.R.
     

     

     
 
 
04112016   Pierce Pacific PC1250  long front that digs to 85' - P.O.R.
  


 
(Click on chart to enlarge)
 
 
04072016   Material handler  front end - P.O.R.
     
 
03202016   Long Front  46 foot front for PC400, boom is 16’ length, stick is 30’ length - P.O.R.
     

 
01202016   JD230 Long Front  - P.O.R.
 
01182016   JD200 Long Reach Package  50', includes new boom, new stick, new boom stick pin, hydraulic lines, bucket linkage, bucket cylinder and bucket - P.O.R.
 
01142016   CAT 365/374  long reach excavator arm - P.O.R.
     

  
 
 
10282015   Pierce long front  LR2-50C, heavy duty stick and boom, weighs approx 12k lbs with bucket - P.O.R.
     
 
10072015   Bateman Long Reach  used 62 ft. long reach boom, stick and bucket for CAT 325 excavator, includes bucket cylinder and linkage, 61 in. wide bucket with bolt-on cutting edge - P.O.R.
     

     
 
 
10052015   CAT 385  with 80 foot front or front alone - P.O.R.
     

  
 
 
07152015   CAT 324  60 foot, includes linkage, stick cyl and the bucket cyl - P.O.R.
     

     

     

     
 
 
05192015   Hitachi EX1900  long boom and stick, the boom is 34 foot and the stick is 24 foot, 13 yard clam shell available - P.O.R.
     

     

     

  
 
 
03212015   PC1250LC-8 Long Arm  60’ long, with over size bucket cylinder, bucket linkage (PC750 linkage), low hour usage, very good condition - P.O.R.
     

     

 
 
01202015   Long Front  2012 unit for PC400, 69' long reach, includes boom, stick and bucket - P.O.R.
 
03272014   PC400 Demolition Stick  22 foot stick to go straight up from the boom - P.O.R.
     

     

  
 
 
Return to Top
 

Long Reach Machines

 
04252016   CAT 330BL  2001 year machine, has about 65 foot reach, does not have a bottom, this is a barge excavator - P.O.R.
     
 
03012017   Hitachi ZX470  2 machines available, new hydraulic pumps - P.O.R.
 
09292016   Hitachi 700  material handler, 55' reach, 4 yd. rotating clamshell bucket included - P.O.R.
  
 
09152016   Liebherr 984C  2005 HD litronic long reach excavator (for under water use), EROPS, A/C, 80 ft reach, 4 cy Esco bucket with digging teeth, with underwater mapping - P.O.R.
     

     

     

  
 
 
07072016   Komatsu PC2000-8  2011 year machine, aprroxz 5950 hours, A/C cabin, drop-down access stairs, handrails on platforms and walkways, fire suppression, standard boom/arm set, heavy duty semi-spadenose bucket - P.O.R.
     

     

     

     
 
 
07062016   Komatsu PC2000-8  2011 year machine, 7344 hours - P.O.R.
     

     

  
 
 
12222015   Volvo EC240BLR  2006 year machine - P.O.R.
     
 
07142016   Kobelco SK210  2002? year machine, Isuzu engine, approx 40-50% undercarriage, 75 foot reach - P.O.R.
     
 
05102016   Long Reach  20 ton Dresser / Komatsu PC200 - Call for rental rate
     

     
 
03292016   Koehring 1066  44' boom, 33' stick, 4 yd bucket, standard and extra counterweight - P.O.R.
  
 
11302015   Liebherr R994  200 series, 32k frame hours, 95 foot front available with it - P.O.R.
     

     
 
 
11302015   CAT 350L ME  with long reach boom, hammerlines, with demolition arrangment, 10k hours, good engine and transmission, ready to work - P.O.R.
     
 
11152015   Komatsu PC2000-8  2009 year excavator, 26,640 hours, enclosed cab, A/C, heater, 12' 11" stick, 39 1/2" track shoes, 112" tooth bucket, auto-lube system, good running condition, available with a long reach front or a material handler front - P.O.R.
  
 
10122015   LinkBelt 240LX  2005 year long reach machine, 3700 hours, 60" clean out bucket, 60% u/c remaining, 32" pads, a/c cab, very well maintained - P.O.R.
     

 
 
10122015   CAT 385C  2005 year long reach excavator, with 80' stick and 3 yrd bucket, excellent condition - P.O.R.
     

     

     
 
 
07022015   Hyundai 290  1998 year machine with a 60 foot long reach, 3465 hours - P.O.R.
 
06212015   Komatsu PC1250LC-7  2005 year machine, approx. 9980 engine hours, has a custom heavy duty 110 ft long reach boom/stick w/ PC300 end with (3) 48" buckets, new 2014 Trimble GPS controlled, WiFi, heat & AC - P.O.R.
     

     

             
 
 
12032014   Liebherr 984C  2005 year machine, with approximately 11k hrs, new engine, new hydraulic pumps, cylinders rebuilt, very good condition, equipped with our 90' heavy duty long reach boom and stick for maximum breakout force required when digging through hard soil, digging depth of 22.8 meters (75 ft.), 30k lb. additional counterweight - P.O.R.
     

      
 
 
07142014   Hitachi EX1100-3  21,400 hours, 29' 10" boom, 11' 2" stick, 8 cu yd bucket - P.O.R.
     

  
 
 
02192014   Hitachi EX1200-LC UHD  2005 year machine, convert boom and stick to modular 3 piece 150’ UHD/excavator fronts, 45 degree tilt back operators cab with F.O.P.S., additional hydraulic circuits installed on machine for demo front, water dust suppression circuit, additional counterweight of 20,000 lbs - P.O.R.
     

     

     

     
 
 
02052013   High Reach / Long Reach  - P.O.R.       (Click on drawing to enlarge)
POTENTIAL HIGH REACH AND LONG REACH FOR 85 TON EXCAVATOR
 
12102012   Custom Demolition / High Reach Stick  Special stick modification for high reach demolition or material handlers - P.O.R.       (Click on pictures to enlarge)
       

   

           



DEMO STICK FOR JD/HITACHI 450
 
 
03282013   ZX650 Long Reach  - 19 meter Digging Depth       (Click on drawing to enlarge)
 
03052014   Terex 225 LC-1  2006 year long reach excavator with 1050 hours, 35 1/2" grousers, U/C 90%, 52' of reach from center swing pin, 28' boom, 18' arm, no leaks, no damage, 2 - 48" ditch cleaning buckets one w/ teeth - P.O.R.
 
10152014   Case CX 210  2005 year machine, 4715 hours, Cummins engine, 50ft long front, 48" cleanout bucket, includes standard boom, stick and counterweight, 55% u/c - P.O.R.
 
10142014   Case 9040B   1999 year machine, 7800 hours, long reach, 60' boom, AC, radio, heat, 30" bucket - P.O.R.
   
 
08052014   Liebherr R984  with a 70 foot front - P.O.R.
 
08052014   Liebherr 974  with a 70 foot front - P.O.R.
 
05282014   CAT 385BL  2003 year 70' long reach - P.O.R.
     

     
 
 
02182014   CAT 365BL  70' long reach, with 14.7k hours - P.O.R.
     

     

     

     
 
 
02172014   Koehring 1466  long reach hydraulic excavator w/ standard boom, extended arm, oversized hoist cylinders and extra counterweight w/ excavator bucket, approx weight is 150-170 metric tons, dig depth is 58 feet, reach is 80 feet (measured from the center of the machine) - Call for rental rate
     

 
 
 
 
Return to Top
 

High Reach Machines

 
03062017   CAT 325CL  2003 year machine, approx 11k hours, approx 60 foot reach - P.O.R.
     

     

 
 
10172016   Liebherr 954   80 foot HRD - P.O.R.
 
10172016   Komatsu PC450   85 foot HRD - P.O.R.
 
10172016   Hitachi FH 400   80 foot HDR - P.O.R.
 
10172016   New Holland E485  80 foot HRD, year 2009, 6580 hours - P.O.R.
     

 
 
04212016   CAT 385C  JS conversion,  20 foot extension for CAT 385, 19' over tracks, has 10,000 C/W add plus 14,000 frame - P.O.R.
     

 
 
02282016   Komatsu PC750  2000 year machine, 6500 hours, 148 feet pin height to end dipper, bolt on outrigger stabilizers, 3-piece demolition front with sectional boom, allowing sections to be removed for lower level demolition, standard digging boom and dipper - P.O.R.
 
02282016   Case CX800  year 2004, 4500 hours, 40m pin height to end dipper, telescopic widen tracks, 3-piece demolition front with telescopic boom, hydraulic modular joint (quickhitch) for quick fitting and drop off demo and standard fronts for transport, standard digging boom and dipper, transport stands, high spec machine in good condition - P.O.R.
 
02282016   Hitachi ZX670  year 2010, 4500 hours, 42m pin height to end dipper, telescopic widen tracks, 3-piece demolition front with telescopic boom, hydraulic modular joint (quickhitch) for quick fitting and drop off demo and standard fronts for transport, standard digging boom and dipper, transport stands, bucket and steel cutting shear - P.O.R.
 
02152016   Kobelco SK400  optional Genesis 450XP available - P.O.R.
      (Click on pictures to enlarge)
   

   

 
 
 
02092016   Case CX460LC HRD  2001 year machine, 7750 hours, weight 110k lbs, 85ft demolition excavator with Kocurek 3 piece demolition arm, hydraulic tilting, machine comes with standard digging arm - P.O.R.
     

     

  
 
 
02092016   Komatsu PC450LC-6 HRD  2001 year machine, 7787 hours, weight 114k lbs, 85ft high reach demolition excavator with 3 piece demolition arm, piped for hammer shear rotate, fitted with Rammer RC22 - P.O.R.
     

     

     

 
 
02092016   Liebherr R954C HDV  2008 year machine, 6001 hours, weight 141k lbs, 85ft high reach demolition excavator, hydraulic tilting cab, various hydraulic line for hammer / shear rotating attachments - P.O.R.
 
02092016   Komatsu PC450 HRD  2005 year machine, 9252 hours, weight 128k lbs, 85ft demolition excavator with 3 piece demo arm and mod joint, quick release pipes on modular joint, piped for hammer rotate and shear - P.O.R.
        

     

     
 
 
11092015   High reach demo front  - P.O.R.
     
 
11092015   PC750  Year 2000 year machine, 5500 hours, fixed width undercarriage w/ bolt on outriggers, additional counterweight, demo guards to cab and body, tilt seat, standard boom and dipper c/w bucket ram and linkage, two straight boom sections and end boom section - P.O.R.
     

     

  
 
 
10282015   PC800 High Reach  2010 year machine, 3600 hrs, high spec machine, with standard high reach boom 40m (131 ft), includes pin in end extension of 3m (10 ft), includes longer dipper taking total length to 45m (148 ft), tool capacity of 2500kg, tilt cab, telescopic u/c, hydraulic modular joint, standard front c/w quick hitch and bucket - P.O.R.
 
10212015   CAT 330  2008 year machine, 7850 hrs, 70 ft high reach, modular joint, Doosan orange, hyd cab, standard boom incl. - P.O.R.
     

 
 
10212015   Hitachi ZX670  2010 year machine, 4500 hrs, 135 ft high reach, telescopic tracks, telescopic boom, Hydraulic modular joint, telescopic boom, bucket and steel cutting shear incl., standard boom incl. - P.O.R.
 
10062015   CAT 5110  Big high reach machine, 90 meters to end dipper pin - P.O.R.
     

     
 
 
10022015   Case CX800  2006 year machine, has 3952 hours, c/w 40 meter or approx. 132 foot demolition front, 3 piece demo front incorporating telescopic boom, hydraulic telescopic track width adjustment, hyd modular joint (quick hitch) for quick easy drop off, tilting cab - P.O.R.
   

   

 
 
09302015   Komatsu PC350LC-8 HRD  2008 year high reach demolition excavator, with 3 piece arm, 24m reach, 5900 hours, also standard digging arm, hydraulic tilting cab, hammer /hydraulic shear lines, hydraulic rotation / tilt lines, safety check valves, cab safety protection guards, safety ring around engine bay, 700mm track shoes, air con cab and rear view camera - P.O.R.
 
09302015   CAT 330DL UHD  2008 year high reach demolition excavator, 7850 hours, stick 2.70m (11 ft), demolition boom 21 meters (70 ft), check valves, hydraulic elevating cabin with A/C, expandable chassis, standard bucket, good working conditions, Doosan color - P.O.R.
 
07082015   CAT 5130  with a 38m 3-piece demo arm fitter, with a Genesis GPX2500 (25t) shear, it will lift the shear 38m in the air - P.O.R.
 
06222015   Komatsu PC450-8  2007 year machine, demo package, tilt cab, extra counterweight, 26 meter boom, 5800 hours - P.O.R.
 
06212015   Hitachi EX300LC  - P.O.R.
         
 
05182015   PC750  year 2000 machine, 5500 hours, fixed width u/c with bolt on outriggers, additional counterweight, standard boom and dipper, c/w bucket ram and linkage, 2 straight boom sections and end boom section - P.O.R.
     

     

     

     

 
 
03252015   CAT 385  2002 year machine with 13.4k hours, approx length of the long reach boom is 12.5m (41 ft) and the stick is 10.1m (33 ft) - P.O.R.
  

     
 
 
01222015   ZX670  2010 year machine, 4400 hrs, 38m demo front, standard digging front, hydraulic modular joint, HD bucket, tilt cab, full demo excavator guards, hydraulic undercarriage width adjustment - P.O.R.
     

     

  
 
 
12172014   Case CX800  2006 year machine, 4500 hours, full modification of base excavator for demolition, guards, tilting seat, 40m 3-piece demolition front, standard digging front, modular joint (quickhitch in boom to change quickly between fronts) - P.O.R.
     

     

     
 
 
12152014   Komatsu PC450HRD-6   2000 year demolition excavator, 12,300 hours, U/C 60% to 70% remaining, European machine with OEM Komatsu CE, A/C, mechanically adjustable U/C, track pads 800mm, central lubrication, HRD boom - 8,3 meters (can be straight or angled), HRD stick - 7,7 meters - P.O.R.
     

     
 
 
12042014   Hitachi EX-1200  with high reach triple boom, 13,500 hours, machine is very well maintained and ready for the job - P.O.R.
     

  
 
 
11042014   EX1200  2003 year machine, with standard arm, bucket and 50m demo arm, approx. 7500 hrs - P.O.R.       (Click on pictures to enlarge)
     

 
10172014   CAT 350  28M high reach demolition excavator, 1999 year machine, with 800mm track pads, Rammer rotating pulverizer, detachable 3 piece arm with a removable extra extension piece, and full hydraulic services for attachments - P.O.R.
     

     

     
 
 
10142014   Komatsu PC450LC-6   26M high reach demolition excavator, 2001 year machine, various hydraulic aux line for attachments, detachable arm sections, demo cage and dust sprinkler system, tilting seat in cab - P.O.R.
           

     

     
 
 
10042014   CAT 385UHD  2007 year machine, 5300 dealer maintained hours, UC 80%, one owner, one operator, factory manufactured 131' front (6k lbs tool cap), Jewell 75' front (15k lbs tool cap) - P.O.R.
     

         

     
 
 
08252014   Sennegbogen 870M  2005 year machine, 15k hours, B23-1 boom & stick configuration, 79' reach, hyd cab riser - P.O.R.
     
 
08222014   Koehring 1066  approx 210,000 lbs, long reach hydraulic excavator with extended boom, extended arm, standard and extra counterweight, oversized (11”) hoist cylinders and assist cylinder, dig depth is 59 feet, reach is 80+ feet (measured from center of machine at ground level), complete standard hoe front with excavator bucket, dig depth 35’ - P.O.R.
 
08072014   EX1200  9m dipper so reaches 50m – tilt seat in place of tilt cab - P.O.R.
     

     
 
 
08072014   CAT 345B  with 6115 hours - P.O.R.
     

  
 
08022014   Komatsu PC450HRD-8  2007 year machine, approx 5700 hrs, equipped with tilting cab, extra counterweight, variable gauge, unused 25m high reach, cab guards - P.O.R.
     

     

  
 
 
07292014   CAT330B  - P.O.R.
             

           
 
 
05062014   Doosan DX420  2007 year machine, 4200 hrs, 26m demo front, standard front with QH and bucket, hyd modular joint, very good condition - P.O.R.
                    

  

     

  
 
 
05042014   PC300  - P.O.R.
     

 
 
03172014   CAT 330  2005 year machine, 10,000 hours, 75% remaining undercarriage condition, 21m demo front, standard digging front, hydraulic modular joint to switch between fronts, hyd tilt cab, hyd widen tracks - P.O.R.
     

 
 
03072014   CAT 345  2006 year machine, 6000 hours, max pin 27m, tilt cab, digging front, demo tool - P.O.R.
 
03072014   CAT 375  2004 year machine, 10,050 hours, max pin 40m, demo tool - P.O.R.
 
03072014   Hitachi 470  2007 year machine, max pin 27m - P.O.R.
 
03072014   CAT 330  2002 year machine, max pin 21m - P.O.R. SOLD
 
03072014   Case 1288  2000 year machine, 10,000 hours, max pin 18m, digging front, demo tool - P.O.R.
 
03072014   Hitachi 460  2005 year machine, max pin 27m, tilt cab - P.O.R.
 
03072014   Doosan 420  2012 year machine, max pin 25m, tilt cab, digging front - P.O.R.
 
03072014   CAT 345  2008 year machine, 6000 hours, max pin 27m, digging front, demo tool - P.O.R.
 
03072014   CAT 375  2007 year machine, 3600 hours, max pin 40m, tilt cab, digging front - P.O.R.
 
03022014   High Demo Front  for Hitachi EX450 or JD450 or Komatsu PC450, front only - P.O.R.   (Click on picture to enlarge)
 
02192014   Hitachi EX1200-LC UHD  2005 year machine, convert boom and stick to modular 3 piece 150’ UHD/excavator fronts, 45 degree tilt back operators cab with F.O.P.S., additional hydraulic circuits installed on machine for demo front, water dust suppression circuit, additional counterweight of 20,000 lbs - P.O.R.
     

     

     

     
 
 
02012014   Kobelco SK400LC  high reach demolition - P.O.R.
     

     

     

     

     

     
 
 
12102012   Custom Demolition / High Reach Stick  Special stick modification for high reach demolition or material handlers - P.O.R.       (Click on pictures to enlarge)
       

   

           



DEMO STICK FOR JD/HITACHI 450
 
 
02052013   High Reach / Long Reach  - P.O.R.       (Click on drawing to enlarge)
POTENTIAL HIGH REACH AND LONG REACH FOR 85 TON EXCAVATOR
 
12102012   Custom Demolition / High Reach Stick  Special stick modification for high reach demolition or material handlers - P.O.R.       (Click on pictures to enlarge)
       

   

           

 
 
10052012   Stick modification  Special stick modification for high reach demolition or material handlers - P.O.R.
       

   
 
 
12062011   Demolition Options  available high reach arrangements - P.O.R.
24 ft. 3rd stick for 650 size machine up to 1.5 CY grapple or bucket,  4000lb. counter weight required for 3rd stick    OR

24 ft. EX extension up to 2.0 CY grapple or bucket,  no extra counter weight required    OR

28 ft. demolition stick up to 10,000lb. tool 57 ft. reach,  4000lb. counter weight required for demolition stick w/ 10,000lb. tool,  16 ft. demolition extend up to 6,000lb. tool 70 ft. reach

       

         
 
 
 

High Reach Machines for Rent

 
03082017   High Reach Machines  - CAT 385 high reach that reaches 130 feet AND a CAT 345 high reach, call for rental rate - P.O.R.
     
 
05082014   Koehring 1466 rental  - call for rental rate - P.O.R.    (click on the photos below to enlarge)
   
 
10062013   JD 200 rental  - 60' reach, call for rental rate - P.O.R.
 
10062013   JD 450 rental  - 44' reach, call for rental rate - P.O.R.
 
10062013   JD 650 rental  - 48' reach, call for rental rate - P.O.R.
 
10062013   PC 1000 rental  - 40' reach, call for rental rate - P.O.R.
 
02062013   400-size Machine Rentals  several 400-size machines that go up to 85 feet - P.O.R.
 
10122012   Demo machine rental   120 ton machine (Click on pictures below to enlarge) - P.O.R.
       
SPECIALIZED HEAVY EQUIP FOR BIG JOBS.....CALL FOR DETAILS
 
 



Return to Top
 


long reach high reach sticks

Call Stretch Boomer

 
LRHR, LLC
106 Ark Road  ·  Lumberton  ·  NJ  ·  08048
Phone: 609-257-3706
Fax: 609-257-3719
E-mail:  longreachhighreach@gmail.com

Design by   Web2k Consulting